Town Mongolian Barbecue Small - Manual (Page 14)

FOOD SERVICE EQUIPMENT CO., INC. • 72 Beadel St. • BKLYN • NY 11222
14
The thermocouple was replaced, is snug but the pilot burner will still not stay lit.
If all else fails, change the head on the safety control. This procedure should be performed only by a
qualified gas service mechanic. Gas to the unit must be shut off before attempting this procedure.
1. Using a 3/8” wrench, remove
the brass thermocouple fitting
from the safety control.
2. Using a 7/16” wrench, remove the brass
fitting from the pilot gas line.
3. Remove the screws from the safety head.
4. Remove the safety head. 5. Remove brass adaptor safety
head and install on the new head.