Town Mongolian Barbecue Small User Manual
Page 15
Advertising
(718) 388-5650 (800) 221-5032 except NY fax: (718) 388-5860 townfood.com
7. Remove and replace the spring/magnet
assembly.
8. New spring/magnet assembly installed.
10. Mount the safety head and replace the screws.
9. Install the new safety head with the new
gasket provided.
11. Carefully thread the brass fitting from the
pilot gas line into the body and tighten using a
1/4
” wrench.
12. Thread the thermocouple fitting into the body
by hand. When you can no longer tighten
by hand, use a 3/8” wrench to make snug. A
good rule is 1/8 after finger tight. DO NOT
OVERTIGHTEN as it will damage the control.
Turn on gas, check for leaks, and relight pilot.
15
Advertising