Alcatel Carrier Internetworking Solutions One Touch 531 User Manual
Page 29
29
To set call cost type to units:
Setting the credit limit (sub-
scription dependent)
You may also be able to set a
credit limit to your calls. When the
credit limit is reached no more
chargeable outgoing or incoming
call is allowed. You can however
still make emergency calls.
The PIN2 code is needed to set the
credit limit.
Show costs
Call costs - resetting all costs to
zero
To reset all call costs to zero:
Alternate line service - selecting
line 2 (subscription dependent)
Some operators support the use
of a second line. You may then
have two mobile phone numbers
(e.g. a business line plus a person-
al line). To use them you need to
select the line to be used.
Enter the unit cost (e.g.: 0.15
Euro per minute).
Press OK
to validate.
Press . Select Calls &
Times.
Select Call costs
.
Select Display cost type
.
Select Units
.
When the cost type is set to units the credit limit and
the remaining credit are shown in units.
Press . Select Calls &
Times.
Select Call costs
.
Select Credit limit
. The
display shows the current set
credit limit.
Select Edit
. Enter your PIN
2 code and press OK
.
Enter the credit limit (use
to type a decimal point for
curencies). Press OK
to
validate.
When a credit limit is set the selection from the 'Credit
limit' display is Edit or Set no limit.
Press . Select Calls &
Times.
Select Call costs
.
Select Show
.
7
1
2
3
4
!
1
2
3
4
5
!
1
2
3
Use
or
to display the
Last Call and All Calls
or show the Remaining
credits.
The remaining credit is shown in either units or cur-
rency as set by Cost Type menu above.
Press . Select Calls &
Times.
Select Call costs
.
Select Reset
.
Select Yes .
Enter the PIN 2 number and
press OK
.
Press . Select Calls &
Times.
Select Line selection.
The current line selection is
displayed.
Use
or
to scroll to the
required line. Press OK
to
validate.
1. The Line selection sub-menu may not be available
on your mobile. Please contact your service provider to
get further details on this service.
2. Line 1 and Line 2 can be named (Office and Home
for instance). Refer to the Own Number menu (see
Own number(s) display, page 17 for details). Whiche-
ver line is selected to send calls, incoming calls can
still be received on either line.
4
!
1
2
3
4
1
2
3
!