Alcatel Carrier Internetworking Solutions One Touch 531 - Manual (Page 54)

54
WAP™
Your mobile allows WAP™(Wireless Appli-
cation Protocol) connections to access op-
erator and/or provided services (e.g. news,
sports, weather, travel buying, etc.).
To get a WAP™ connection please make
sure:
• your SIM card bears a Data sub-
scription
• all parameters are stored into the
mobile. These parameters may
have been set by your operator. If
not you have to enter them man-
ually.
Please contact your service provider to
check these elements and get the detailed
list of parameters to be entered.
Storing the connection set-
tings
The current date and time must be set be-
fore you enter any WAP™ connection set-
ting (see ’Setting the Date and Time’ on
the ’Getting started with your
One Touch™ 531 booklet).
The profile list can contain up to 10 WAP™
profiles. A profile is a WAP™ connection
list of parameters. Each profile allows ac-
cess to a specific WAP™ gateway.
To enter and store the profile
details via the Assistant
The Assistant feature allows easy entering
of the WAP™ parameters to access WAP™
servers. It displays the fields to be filled in
one after another.
To enter and store the profile
details in standard mode
You can only register profile details via the
standard mode if you have previously reg-
istered profiles in the Connection manager
menu (see Connection manager, page 51):
Press . Select WAP™.
Select WAP™ profiles
.
Choose an empty profile ([...])
by selecting Assist
.
1
2
3
Enter each parameter and vali-
date by selecting OK
.
There are 6 screen levels to be
filled in. The requested infor-
mation depends on connec-
tion type.
If you want to set a WAP™
(circuit) connection, please fill
in the following fields:
1/6 Profile name
2/6 Gateway IP Address
3/6 Home page (URL
address): select List to get
and select one of the available
home page addresses or the
http:// and https:// root
addresses.
Select Circuit connection
.
4/6 Phone number
5/6 Login (Identification)
6/6 Password (for access
control)
If you want to set a GPRS con-
nection, please fill in
the following fields:
1/6 Profile name,
2/6 Gateway IP Address,
3/6 Home page (URL
address)
Select Packets
.
4/6 Access point name
5/6 Login (identification)
6/6 Password (for access
control)
Press . Select WAP™.
Select WAP™ profiles
.
Choose an empty profile ([...])
by selecting OK
.
Enter the profile name and
select OK
.
Select Settings .
4
1
2
3
4
5