Alcatel Carrier Internetworking Solutions One Touch 531 - Manual (Page 50)

50
Alarm clock
This feature allows setting a daily 'Remind-
er Alarm'.
To set a time and turn the alarm on:
When the alarm time is reached an au-
dible alert sounds for 1 minute.
Alarm clock
and a vibrating bell sym-
bol are displayed together with the
current time.
If the phone is off at alarm time the
phone automatically switches on.
To use the alarm as a Reminder or a
Snooze Alarm:
If the phone is locked or if the PIN set-
ting is on the phone returns to this
locked state after the alarm has rung
until you operate it.
If the alarm is acknowledged but not
validated the alarm indicators remain
on the display for up to 15 minutes (it
afterwards either goes back to its 'on'
or 'off' previous state).
To turn the alarm off:
Press . Select Office Tools.
Select Alarm clock
.
Select On and enter the
alarm time or press OK to
validate the displayed time.
Confirmation is then dis-
played. is displayed when
coming back to the idle screen.
When 'on' the alarm operates at the same time every
day until turned off.
Press No ring , or any other
key (except Valid. ) to stop
the alarm. The alarm icons re-
main on the display and the
alarm re-starts ringing 3 minutes
later.
or
Press Valid. to acknowledge
and end the alarm ringing.
Press . Select Office Tools.
Select Alarm clock
.
Select Off.
1
2
3
!
1
2
3
1. If the Valid softkey is not pressed after the 3rd (and
final) alarm ringing the ringing is not repeated but
the phone remains on for 15 minutes. After those
15 minutes the phone reverts to its state before the
alarm sounded.
2. If the phone is being switched on or off at alarm
time the alarm clock starts ringing after this transi-
tional step is over.
3. If a call is on at alarm time a 'Call in progress' alert
beep sounds and a visual alert is displayed every 3
minutes. Validate or acknowledge the alarm the
usual way.
!