AGFA 1815 Copier - Manual (Page 44)

Preparations
3-12
10 Use the keypad to enter the IP address. Enter the first
segment of the IP address.
11 Press the X key and enter the second segment of the
IP address.
12 Press the
X
key and enter the third segment, then
press again and enter the last segment.
13 Press the Enter key. The message display shows
Completed and returns to the TCP/IP Setting
copy basic screen.
Next, perform the following procedure to assign the
Subnet Mask.
Registering the Subnet Mask
To assign the Subnet Mask, repeat steps 1 to 7 in the above procedure.
1 Press the S key or the T key to select Subnet Mask.
IP Address:
Cancel
0. 0. 0. 0
IP Address:
Cancel
10. 0. 0. 0
IP Address:
Cancel
168. 0. 123 10.
*
TCP/IP Setting:
DHCP
IP Address
Exit
Subnet Mask