AGFA 1815 Copier - Manual (Page 49)

Preparations
3-17
Setting the Date and Time
Perform the following procedure to set the current date and time.
You can also make this setting using COMMAND CENTER. For details on COMMAND CENTER,
refer to Chapter 5 in Advanced Operation Guide, Date and Time.
1 Press the System Menu/Counter key.
2 Press the S key or the T key to select Date/Timer
Set.
3 Press the Enter key.
4 Press the S key or the T key to select Year/Time.
*
Sys. Menu/Count.:
System Setting
Date/Timer Set.
Adjust
Exit
*
Date/Timer Set.:
Date Format
Year/Time
Back
Exit