AGFA 1815 Copier - Manual (Page 55)

Preparations
3-23
Default Operation Mode
Use the following procedure to set the operation mode selected when the machine is powered on.
Modes available are Copy Operation, Scanner Operation or Status Operation. It is recommended
you select the most commonly used mode as the default.
1 Press the System Menu/Counter key.
2 Press the S key or the T key to select Common
Setting.
3 Press the Enter key.
4 Press the S key or the T key to select Default
Operat.
5 Press the Enter key.
*
Sys. Menu/Count.:
Date/Timer Set.
Adjust
Common Setting
Exit
Common Setting:
Default Operat.
Language
Back
Exit