ConnectPRO Master-IT PRO User Manual – Older model - Manual (Page 13)

13
T O I NITIATE OR D EACTIVATE A UTO -S CAN :
Press and release the left CTRL key twice, followed by the F1 key
once.
CTRL , CTRL , F1
To deactivate the Auto Scan feature, press and release the left CTRL
key twice.
When Auto Scan detects any keyboard or mouse activity, it suspends
the scanning until activity stops; it then resumes with the next
computer in sequence. The length of the Auto Scan interval (Scan
Rate) is adjustable. Locked devices will be skipped during the scan.
The Auto Scan facility automatically displays either all computers that
are powered ON or individually selected computers chosen by the
operator, one-by-one at a fixed interval.
T O I NITIATE M ANUAL S CAN :
Press and release the left CTRL key twice, followed by the F2 key
once.
CTRL , CTRL , F2
Manual Scan enables manual back and forth switching between
computers that are powered ON. Locked devices cannot be scanned.
Press
↑ ↑ (up) arrow key or ↓ ↓ (down) arrow key to select the previous
or the next computer in sequence. To deactivate Manual Scan, press
any other key.
T O A DJUST THE S CAN R ATE I NTERVAL :
To adjust the Scan Rate interval, press and release the left CTRL key
twice, followed by the F3 key once.
CTRL , CTRL , F3
E ntering this key sequence sets the time duration between switching
to the next computer.
One to four beeps will sound to indicate a scan rate interval of 3, 8, 15
and 30 seconds respectively.