ConnectPRO Master-IT PRO User Manual – Older model - Manual (Page 4)

4
1 INTRODUCTION
Overview
ConnectPRO

is proud to announce the Master-IT PRO professional
line of KVM switches. With the use of one keyboard, one monitor, and
one mouse, multiple computer systems can be accessed and controlled.
Designed for both industrial and office use, the Master-IT PRO functions
independently of the operating system and does not require any
additional interface cards or software. Installation is simply a matter of
connecting cables. Front panel buttons, hot-key commands, and On-
Screen-Display features provide easy operation and computer selection.
The Master-IT PRO is available in 2, 4, 8, & 16 port models, as well as
Dual-Console configurations providing connectivity for over 128 systems
from a single console. All models support both PS/2 and AT/Serial mice
and keyboards and are easily installed in standard 19” server racks with
the exception of the PR-12, which is not rack mountable.
The On-Screen-Display (OSD) is an optional facility and is available on
all models with four or more ports. The OSD includes features for
automatic scanning of select systems, secure port authentication, visual
port identification, and cascade systems monitoring.
Firmware upgrades are standard, and for those special projects, the
Master-IT PRO can be configured with specially designed firmware to
accommodate the most unique industrial applications.
The Master-IT PRO is the best cost-effective and space saving solution
for industrial and office applications.
Features
•
Manage over 128 systems with one or two consoles.
•
All hot-swappable ports.
•
System selection by front panel buttons, or hotkey commands.
•
Supports 1920 x 1440 video resolution.
•
Supports 200 MHz bandwidth.
•
Auto-Scan facility.
•
19" rack-mountable (except PR-12).
•
Two-Tier cascadable.
•
Buzzer sound for switching confirmation.
•
Supports PS/2 & AT/Serial mice & keyboards.
•
Individual port buttons and LEDs.
•
Project specific firmware available.