ConnectPRO Master-IT PRO User Manual – Older model - Manual (Page 15)

15
On-Screen-Display (OSD)
T
O
I
NITIATE
OSD:
Press and release the left CTRL key twice to view the hot-key menu.
Press and release the left CTRL key three times to view the KVM
MENU.
The Hot-Key Menu shows instructions for the various OSD functions.
Use this as a guide to become familiar with its’ functions.
The KVM Menu shows a list of the computers with corresponding
channel addresses, names and status information.
T O E XIT OSD:
Press and release the ESC key once.
T O L ABEL A P ORT :
To edit a name entry of a computer or a Master-IT PRO slave unit.
Use the
↑ ↑ (up) and ↓ ↓ (down) arrow keys to highlight a channel, then
press the F1 key followed by an 8 character name entry. Valid
characters are A~Z, and 0~9 and the dash character. Lowercase
letters are automatically converted to capitals. Press the
BACKSPACE key to make changes. All name entries are retained
until changed by the operator, even if the unit is completely powered
OFF or in storage.