Important safety information, Important electrical information, Capability – Wagner Power Painter Pro with EZ Tilt User Manual

Page 3: Do not use, English

Advertising
background image

English

© Wagner Spray Tech - All Rights Reserved

3

Important Safety Information

WaRnInG - To reduce the risk of skin

injection:

1. Do not aim the gun at, or spray any person or

animal.

2. Keep hands and other body parts away from the

discharge. For example, do not try to stop leaks

with any part of the body.

3. Always use the nozzle tip guard. Do not spray

without the nozzle tip guard in place.

4. Only use a nozzle tip specified by the

manufacturer.

5. Use caution when cleaning and changing

nozzle tips.

6. High-pressure spray is able to inject toxins into

the body and cause serious bodily injury. In

the event that injection occurs, seek medical

attention immediately.

7. This system is capable of producing 2800

PSI / 193 Bar. Only use replacement parts

or accessories that are specified by the

manufacturer and that are rated a minimum of

2800 PSI. This includes spray tips, nozzle guards

and extensions.

8. Verify that all connections are secure before

operating the unit.

WaRnInG - To reduce the risk of

injury:

1. Always wear appropriate gloves, eye protection,

clothing and a respirator or mask when

painting. Hazardous vapors – Paints, solvents,

insecticides, and other materials can be harmful

if inhaled or come in contact with body. Vapors

can cause severe nausea, fainting or poisoning.

2. Do not operate or spray near children. Keep

children away from equipment at all times.

3. Do not overreach or stand on an unstable

support. Keep effective footing and balance at

all times.

4. Stay alert and watch what you are doing.
5. Do not operate the unit when fatigued or under

the influence of drugs or alcohol.

WaRnInG - To reduce the risk of

electric shock:

1. Keep electrical cord plug and spray gun trigger

free from paint and other liquids. Never hold

cord at plug connections to support cord.

Failure to observe may result in an electrical

shock.

2. Never immerse electrical parts in water or any

other liquid. Wipe the exterior of the sprayer

with a damp cloth for cleaning. Always make

sure the sprayer is unplugged before taking it

apart for cleaning.

Important Electrical

Information

Use only a 3-wire extension cord that has a 3-blade

grounding plug and a 3-slot receptacle that will

accept the plug on the product. Make sure your

extension cord is in good condition. When using an

extension cord, be sure to use one heavy enough

to carry the current your product will draw. An

undersized cord will cause a drop in line voltage

resulting in loss of power and overheating. A 14

gauge or 12 gauge cord is recommended. If an

extension cord is to be used outdoors, it must be

marked with the suffix W-A after the cord type

designation. For example, a designation of SJTW-A

would indicate that the cord would be appropriate

for outdoor use.
Wagner Spray Tech accessory extension cords

recommended:
P/N 0090241

20 foot extension cord

P/N 0090242

35 foot extension cord

IMPORTanT: Household use only. Intended for

indoor/outdoor use OnLY with materials having

flashpoint above 70ºF (21ºC).

Capability:

Sprays a variety of paints (oil-based and latex),

primers, stains, preservatives and other nonabrasive

materials. Do not use materials with flash points

below 70° F (21° C).

Do not use!

This pump should not be used with textured

materials, block filler, lacquers, industrial enamels,

or asphalt sealer or materials containing HHC. See

coating supplier if flash point is not listed on the

container.

Advertising
This manual is related to the following products: