Wagner Power Painter Pro with EZ Tilt - Manual (Page 6)

English
6 © Wagner Spray Tech - All Rights Reserved
Cup Mode Setup
Recommended for small to medium jobs
The cup will give you approximately 3-5 minutes of
continuous spraying time depending upon the cup size.
IMPORTanT: avoid running the cup dry. an empty
cup will allow air to become sucked into the sprayer,
which leads to globbing and spitting.
IMPORTanT: always
make sure the tip nut is
tightened securely prior
to spraying.
Cup Mode Setup:
1. Remove the cup - Press and hold cup release button.
2. Turn cup to release. Remove cup.
3. Attach fill lid to the paint container for easier pouring.
4. Fill the cup.
note: Fill right up to, but do not exceed, the MAx FILL
line.
5. Replace the cup. Line up the tabs / slots.
note: The cup grip / cup handle can be oriented on either
side of the sprayer, depending upon your preference.
6. Turn cup to lock.
note: The cup should “click” back into place.
or
1
2
3
6 4 5
1
2