Samlex America SA-1500 - Manual (Page 24)

22
8-2-2-2. Command format
This unit supports the following commands.
There should always be a CR (0DH) and a LF (0AH)
appended to the command while sending the command to his
unit.
8-2-2-3. PWRS command ：
Power saving function control
Format
： PWRS < value>
Illustration ：A space (ASCll code 20H) is needed between
PWRS and < value >
< value > can be one of the following
“0”
：Power saving disable
“1” ：Power saving enable
“2” ：Inquire the status of saving the response information
would be either “0” (disable) or “1” (enable)
8-2-2-4. Power command
Power ON/OFF control
Format
：Power < value>
Illustration ：A space (ASCll code 20H) is needed between
PWRS and < value >
< value > can be one of the following
“0”
：Power off, power consumption < 2W, restart time < 5 sec
“1” ：Power off, power consumption <20W, restart time < 2
sec
“2” ：Power on
“3” ：Inquire the status of power on/off status, the response
information would be either “0” (OFF) or “1” (OFF) or “2”
(ON)