Campbell Scientific PVS4100/4120/4150 Portable Automatic Samplers - Manual (Page 83)

Section 5. Programming
5-43
OTHER OPTIONS
Press the VIEW key.
Press the OTHER OPTIONS key.
Use ARROW keys to navigate to desired option on
the flashing display.
Press ENTER to view.
Available options are:
Clock - Time, Date (including Day)
Purge Time - Time in seconds
Pinch Valve - Normally Open or Closed
Fault Shutdown - Enabled or Disabled
Sampler Status - Error and system messages that
have been lost from the display by keyboard entry.
Cycles Abandoned - Counter
Bottle Position - Relative position of distributor,
Maintenance
-
Serial Number - unit identification No.,
- Analog channels - A/D output display,
- Backup battery test - test of onboard Lithium
battery,
- Memory check - test of controller RAM/ROM
locations.
- Keypad Check - test of touchpad
(Under Maintenance, ARROW to selection, then
display with ENTER.)
ACTIVE SETTINGS
Press the VIEW key.
Press the ACTIVE SETTINGS key.
The display will show “ACTIVE SETTINGS
‘ENTER’ to list”.
Press the ENTER key. The display will show the
START DELAY programming.
Continuously pressing the ENTER key will display
all of the active program selections and return to the
original display.
Sequence: VIEW, ACTIVE SETTINGS,
ENTER(S)