2 controls, 3 device configuration utility, 1 overview – Campbell Scientific PC400 Datalogger Support Software User Manual
Page 203: 2 controls -9, 3 device, Configuration utility -9, 1 overview -9
Section 10. Utilities
The transformed file cannot be edited in the Transformer. Once transformed, it
can be opened in the CRBasic Editor or saved under a new file name. To open
the program in the CRBasic Editor, press the CRBasic program icon
at
the top left of the window. To save the file under a different name, choose File
| Program File | Save As.
If an Edlog file previously has been opened in the Transformer, when the file is
opened a second time you will receive a message “This file, <filename>,
already exists. If you overwrite it, the information it contains will be lost. Do
you want to overwrite it?” If you choose Yes, the existing CR1 file will be
overwritten. If you choose No, you will be given the opportunity to provide a
new name for the file. This message can be suppressed by selecting Options |
Suppress “Overwrite File” Warning from the Transformer menu. However,
note that you should strongly consider keeping this message intact to avoid the
possibility of overwriting a file that you transformed and then subsequently
edited in the CRBasic Editor.
10.2.2 Controls
The following buttons are used within the Transformer to move to a different
location in the file, or save or print the file.
Copies the highlighted text to the Windows clipboard. The
information can then be pasted into another application.
Searches for specific text in the file.
Moves the mouse cursor to the beginning of the file.
Moves the mouse cursor to the end of the file.
Jumps to a specific line number in the file.
Prints the contents of the window (Action Log only).
Saves the contents of the window (Action Log only).
10.3 Device Configuration Utility
10.3.1 Overview
The Device Configuration Utility (DevConfig) is used to set up dataloggers
and intelligent peripherals before those devices are deployed in the field and
before the devices are added to networks in Campbell Scientific datalogger
support software such as LoggerNet or PC400. Some key features of
DevConfig include:
10-9