Campbell Scientific PC400 Datalogger Support Software - Manual (Page 34)

Section 4. The PC400 Main Screen
Available language packages are provided by Campbell
Scientific’s international representatives or on the CSI website.
They are not included in a standard PC400 installation. NOTE
4.5.2 Datalogger Menu
4.5.2.1
4.5.2.2
4.5.2.3
Connect/Disconnect
This option provides the same function as the Connect/Disconnect button on
the main toolbar.
Update Table Definitions
When a table-based datalogger is first set up or when a new program is sent,
PC400 queries the datalogger for its table definitions. This information is used
when displaying data in the Monitor Data tab and when collecting data.
If a new program is sent by another user or by using some other program,
PC400 will not be aware of the changes in the datalogger’s table definitions.
To update the table definitions for a datalogger, connect to that datalogger and
select Update Table Definitions from the Datalogger menu.
Station Status
Information about the datalogger program, the execution of the program,
battery voltage, internal temperature, etc. can be viewed from the Datalogger |
Station Status menu item.
4-10