Avocent DSR4010 - Manual (Page 37)

Chapter 3: Local Port Operation 31
Figure 3.6: Device Modify Dialog Box
3. Choose the number of ports supported by your switch and click OK.
4. Repeat steps 1–3 for each port requiring a device type to be assigned.
5. Click OK in the Devices dialog box to save settings.
NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the
Devices dialog box.
Changing the Display Behavior
Use the Menu dialog box to change the display order of servers and set a
Screen Delay Time for OSCAR. The display order setting alters how servers
will display in several screens including the Main, Devices and Broadcast
dialog boxes.
To access the Menu dialog box:
1. Press Print Screen to launch OSCAR. The Main dialog box appears.
2. Click Setup - Menu in the Main dialog box. The Main setup menu appears
(see Figure 3.7).