Avocent DSR4010 - Manual (Page 68)

62 DSR Installer/User Guide
•
DSR/CD Mode - This option allows you to control how the DSR and CD
lines operate. Available options are Always on and Toggle. When in Toggle
mode, DSR and CD lines are turned off for one-half second and then
turned on each time a module is selected or deselected. The default value
is Always on.
•
Enter Sends - This option enables you to specify the keys that are trans-
mitted when Enter is pressed. Available options are <CR> (Enter), which
moves the cursor to the left side of the screen, or <CR><LF> (Enter-Line-
feed), which moves the cursor to the left side of the screen and down
one line.
•
Received - This option enables you to specify how the module trans-
lates a received Enter character. Available options are <CR> (Enter) or
<CR><LF> (Enter-Linefeed).
•
Background - This option changes the screen’s background color. The cur-
rently-selected color displays in the option line as it is changed. Available
values are ØØ
- 3E. The default value is ØØ. This value cannot be identical
to the Normal Text or Bold Text value.
•
Normal Text - This option changes the screen’s normal text color. The
currently-selected color displays in the option line as it is changed.
Available values are ØØ-3E. The default value is 2A. This value cannot
be identical to the Bold Text or Background value.
•
Bold Text - This option changes the screen’s bold text color. The currently-
selected color displays in the option line as it is changed. Available values
are ØØ-3E. The default value is 3F. This value cannot be identical to the
Normal Text or Background value.
•
Screen Size - This option allows you to specify the screen’s text width size.
Available values are widths of 80 columns or 32 columns. The length for
both widths is 26 lines.
The following Configuration Screen options enable you to define the function
keys that will perform a selected action. To specify a new function key, press
and hold the Ctrl key, then press the function key that you want to associate
with the action. For example, if you want to change the Configuration (Config)
Key Sequences option from <CTRL-F8> to <CTRL-F7>, press and hold the Ctrl
key and then press F7.
•
Confi g Key Sequences - This option allows you to defi ne the key combina-
tion that causes the Confi guration Screen to appear.
•
On-Line Key Sequence - This option allows you to defi ne the key sequence
that displays the On-Line mode. The default key sequence is Ctrl-F10.
•
Help Key Sequence - This option allows you to defi ne the key combination
that displays the Help System screen. The default key sequence is Ctrl-F1.