Avocent DSR4010 User Manual

Page 58

Advertising
background image

52

DSR Installer/User Guide

When a DSR appliance is added to the database with DSAdmin, the

appropriate DSAuth server certificate is added to the DSR automatically. If

DSAuthentication cannot contact the DSR to add the certificate, an error

message is displayed and the DSR is not added to the database.

When the last reference to a DSR is removed from the database, the DSAuth

server certificate is removed from the DSR, which allows the DSR to be moved

from one DSAuth server to another. The DSAuth server certificate can also be

removed from the Security menu on the DSR console port via the Reset

Security Keys option.

When the DSR is in All mode, DSAdmin displays a warning message when the

DSR is added to the database, stating that the certificate could not be installed. If

you intend to operate in All mode, you may safely ignore this warning. Otherwise,

you may wish to change the Security settings on the console port of the DSR.

SNMP Confi guration

This menu option allows you to enable SNMP and to specify parameters for

SNMP operation. The following SNMP parameters may be configured:

SNMP - Enables or disables SNMP

Read community name - Specifi es the community from which traps will
be read

Write community name - Specifi es the community to which traps will
be written

Trap community name - Indicates the name of the community containing
a trap

Trap destination address (1-4) - Indicates the addresses of up to four trap
hosts to which you want to send SNMP traps

Trap confi guration - Displays the SNMP Trap Confi guration menu. You
may select Enable All Traps, Disable All Traps or choose to enable or dis-
able any of the following traps:

Cold Start - No display

Link Down - Displays the index of the Ethernet interface

Link Up - Displays the index of the Ethernet interface

SNMP Authentication Failure - No display

Reboot Started - Displays the username

Video Session Started - Displays the user, port and channel number

Video Session Stopped - Displays the user, port and channel number

Advertising
This manual is related to the following products: