Avocent DSR4010 - Manual (Page 51)

Chapter 3: Local Port Operation 45
Figure 3.17: Disconnect Dialog Box
4. Click OK to disconnect the user and return to the User Status dialog box.
-or-
Click X or press Escape to exit the dialog box without disconnecting a user.
NOTE: If the User Status list has changed since it was last displayed, the mouse cursor will
turn into an hourglass as the list is automatically updated. No mouse or keyboard input will be
accepted until the list update is complete.
Resetting Your PS/2 Keyboard and Mouse
If your PS/2 keyboard or mouse locks up, you may be able to re-establish
operation of these peripherals by issuing a reset command. The reset
command sends a hot-plug sequence to the server which causes the mouse and
keyboard settings to be sent to the DSR. With communication re-established
between the server and the DSR, functionality is restored to the user.
NOTE: This function is for Microsoft Windows-based computers only. Resetting the PS/2 on a
computer running any other operating system may require that you reboot that computer.
To reset the PS/2 mouse and keyboard values:
1. If OSCAR is not open, press Print Screen. The Main dialog box will appear.
2. Click Commands - Reset PS/2. A message box displays requesting that you
confi rm the reset. Click OK.
a. A message appears indicating that the mouse and keyboard have
been reset.