Samsung SCX-6555N-XBG - Manual (Page 42)

Troubleshooting_ 42
11.
Troubleshooting
This chapter gives helpful information for what to do if you face an error.
This chapter includes:
• Common errors
• Understanding error codes
Common errors
Device shows SyncThru Login message even if Job Accounting is disabled.
When the device shows the SyncThru Login screen even though the Job Accounting feature is disabled from SyncThru™
Admin 5, follow the below steps:
1. Go to the Device.
2. From the devices control panel, press Machine Setup.
3. Select Admin Settings.
Admin Settings Login screen appears.
4. Enter in the administrator’s password
5. Click OK .
6. Select Setup > Authentication > Authentication Mode.
7. Select No Authentication Mode and click OK.
The SyncThru Login authentication screen will be removed.
After changing Job Accounting-enabled device to local device, Job Accounting is not
working.
You can use Job Accounting only for the network devices. Therefore, if you change the network device to local device (via
USB), Job Accounting will not work any more. In this case, your device might still display Login window if you did not
disable Job Accounting. Please reset Job Accounting settings.