Wi-fi, Web and data, Turn wi-fi on and connect to a wireless network – Samsung SPH-D710ZKASPR User Manual
Page 141
Web and Data
139
Web and Data
This section addresses your device’s data connections and the built-in Web browser. Additional
data-related features can be found in
Applications and Entertainment
Your device’s data capabilities let you wirelessly access the Internet or your corporate network
through a variety of connections, including:
Virtual Private Networks (VPN)
Wi-Fi
Wi-Fi provides wireless Internet access over dis
tances of up to 300 feet. To use your device’s
Wi-
Fi, you need access to a wireless access point or “hotspot.”
The availability and range of the Wi-Fi signal depends on a number of factors, including
infrastructure and other objects through which the signal passes.
Turn Wi-Fi On and Connect to a Wireless Network
By default, your device’s Wi-Fi feature is turned off. Turning Wi-Fi on makes your device able to
discover and connect to compatible in-range WAPs.
Turn Wi-Fi on:
1. Press
>
and tap
> Wireless and network > Wi-Fi settings.
2. Tap the Wi-Fi field to activate the feature (green checkmark indicates active). The
device scans for available in-range wireless networks.
Note: The next time your device connects to a previously accessed secured wireless network,
you will not be prompted to enter the WEP key again, unless you reset your device to its
factory default settings.
Wi-Fi networks are self-discoverable, which means no additional steps are required for
your device to connect to a Wi-Fi network. It may be necessary to provide a user name
and password for certain closed wireless networks.