Samsung SPH-D710ZKASPR - Manual (Page 45)

Phone 43
● Speaker: Route the device’s audio through the speaker (On) or through the earpiece
(Off).
 Activate Speaker to route the device’s audio through the speaker. (You can adjust
the speaker volume using the volume buttons.)
 Deactivate Speaker to use the device’s earpiece.
Warning: Because of higher volume levels, do not place the device near your ear during
speakerphone use.
● Mute: Mute the microphone during an active call. Tap again to unmute the microphone.
Note: If Mute is activated, the speaker mode is deactivated.
● Bluetooth: Route the device’s audio through a connected Bluetooth headset (On) or
through the speaker (Off).
 When the call is routed to a Bluetooth headset, the current call area shows the
Bluetooth call icon .
Note: The Headset button is activated to show the current call is routed to the connected
Bluetooth headset.
 To route the current call back to the device, tap Headset to temporarily use the
device. Tap it again to route the call back to the connected Bluetooth headset.
 When Bluetooth or the Bluetooth headset is turned off, the call is routed through
either the earpiece or speaker.
● Press
during a call to display a list of additional in-call features. Tap an option to
select it.
 Contacts: Display your contacts list.
Speed Dialing
You can assign a short cut number to a phone number in your Contacts List for speed dialing.
There are nine available numbered spaces. The number 1 is reserved for Voicemail.
1. Press and tap > .
2. Press and tap Speed dial setting.
or