Samsung SPH-D710ZKASPR - Manual (Page 59)

Device Settings 57
►
Press the volume button up repeatedly to select a volume level.
To set your device to silent mode:
1. Press > and tap > Sound.
2. Tap Silent mode. This option silences all audio on the device except for media and
alarms. (If you have already checked the option, tapping it again deselects this option.)
Vibrate
To set your device to vibrate for incoming calls and silent for notifications:
►
Press the volume button down in standby mode until you see on the screen.
To set your device to vibrate for incoming calls:
1. Press > and tap > Sound.
2. Tap Vibration and select Always, Never, Only in silent mode, or Only when not in
silent mode. (If you have already checked the option, tapping it again deselects the
option.)
To set your device to vibrate while using the dialpad and making onscreen selections:
1. Press > and tap > Sound.
2. Tap Haptic feedback. (If you have already checked the option, tapping it again
deselects the option.)
 This provides a physical feedback when interacting with the onscreen options.
Volume
Adjust the volume settings to suit your needs and your environment.
1. Press > and tap > Sound > Volume.
2. Touch and drag the onscreen sliders to assign to volume level settings for the following:
 Incoming call, Media, System, Notification.
3. Tap OK to assign the volume levels.
 You can adjust the ringer volume in standby mode (or the earpiece volume during a
call) by using the volume button on the left side of your device.