Samsung SPH-D710ZKASPR - Manual (Page 63)

Device Settings 61
 Clear the Notification flash checkmark to disable this feature.
Horizontal Calibration
This feature allows you to horizontally calibrate your display using the accelerometer.
1. Press > and tap > Display > Horizontal calibration.
2. Place the device on a level surface and tap Calibrate. The device adjusts the level of
the accelerometer. During the calibration process a green circle appears onscreen and
the center circle adjusts to the center position.
Gyro Sensor Calibration
This feature allows you to calibrate the device motion using a gyroscope.
1. Press > and tap > Display > Gyro sensor calibration.
2. Place the device on a level surface and tap Calibrate. The device adjusts the level of
the gyroscope. During the calibration process a green circle appears onscreen and the
center circle adjusts to the center position.
Power Saving Mode Settings
Control your device’s data delivery and battery usage through this settings menu.
Data Saver
Battery Usage
Data Saver
Active applications, light levels, Bluetooth usage, and GPS functionality all act to drain your
battery. The following is a list of helpful tips that can help conserve your battery power:
● Reduce your backlight on time.
● Turn Bluetooth off when not in use.
● Turn Wi-Fi off when not in use.
● Turn 4G off when not in use
● Turn off Sprint Hotspot (Wi-Fi hotspot) services when not in use. This is one of the
largest drains on your battery as it is not only transmitting a Wi-Fi connection to your
devices but is also doing it while using a 4G connection.