Insert a microsd card – Samsung SPH-D710ZKASPR User Manual

Page 191

Advertising
background image

Tools and Calendar

189

2. Firmly press the card into the slot and release it. The card should pop partially out of the

slot.

3. Remove the card from the slot.

4. Replace the battery cover.

Important:

You can easily damage the microSD card and its adapter by improper
operation. Please be careful when inserting, removing, or handling it.

Do not over-insert the card as this can damage the contact pins.

Be sure to use only recommended microSD cards (<32GB). Using non-
recommended microSD cards could cause data loss and damage your device.

Make sure your battery is fully charged before using the microSD card. Your
data may become damaged or unusable if the battery runs out while using the
microSD card.

Insert a microSD Card

1. Remove the battery cover.

 Grasp the device firmly and locate the slot at the top of the device.

Place your fingernail in the opening and firmly “pop” the cover off the device (similar
to a soda can).

2. Orient the card with the gold strips facing down.

3. Firmly press the card into the slot and make sure that it catches with the push-click

insertion.

Advertising
This manual is related to the following products: