Storage settings – Samsung SPH-D710ZKASPR User Manual
Page 77
Device Settings
75
Once the device has reset, it will run through the Hands Free Activation and update
processes again. When finished, you will see the Welcome screen and Setup
application. See
Complete the Setup Application
Storage Settings
You can manage the information and configuration related to both your microSD card and built-
in device storage memory.
To view your device’s total available memory:
1. Press
>
and tap
> Storage.
2. Review the two memory sections for available space information:
SD card displays the memory information specific to an installed microSD card. This
amount of space can be altered by replacing the current microSD card.
USB Storage displays the memory information specific to the built-in device
memory. This memory amount cannot be altered because it is part of the device
hardware.
To view your microSD card storage information:
1. Press
>
and tap
> Storage.
2. Locate the SD card section.
3. Review the available fields:
Total space indicates the total size of the currently inserted microSD card. This
includes both available and used space information.
To determine the amount of memory currently used on the card, take the total
space and subtract the remaining available space.
Note: Not all of the microSD card is registered in the available space, as a small percentage of
the storage is unread. A 16GB microSD card will show approximately 14.73GB of total
space.
Available space indicates the amount of remaining free memory space available on
the microSD card.