Samsung ML-3471ND-XAR User Manual
Page 45
Devices_ 45
Copy
ITEM
OPTION&DESCRIPTION
General
•
Color Printing Enabled : You can set the default color mode for devices. Set the option
and click Add.
•
USB Direct Printing Enabled : This option is policy on USB direct printing usage. If
you enable this option, a device will support USB direct printing. Set the option and click
Add.
•
Print Default Duplex : This option is to set duplex printing as a default option. If it’s set
to Off, pages will be printed on only one side. If it’s set to Long Edge, pages will be
printed on both sides with long-edge binding. If it’s set to Short Edge, pages will be
printed on both sides with short-edge binding. Set the option and click Add.
•
Print Default Orientation : This option is to set the default page orientation. You can
choose between Portrait or Landscape. Set the option and click Add.
•
Print Resolution : This option is to set the default value for print resolution on the
device. A higher resolution may increase printing time. Set the option and click Add.
•
Print Darkness : This option is to set the default value for print darkness on the device.
Set the option and click Add.
Color
•
Auto Color Registration : This option is the state of the automatic color registration
process. You can start automatic color registration now with this option. Set the option
and click Add.
Auto Color Registration options cannot be added if they are not checked since
it’s operated directly from the device.
•
Black/Cyan/Magenta/Yellow : You can set the relative level of black/cyan/magenta/
yellow color registration. The default value is zero. Set the option and click Add.
Layout
•
Duplex Top Margin : You can set the top margin for duplex printing. You can set the
value in millimeters. Set the option and click Add.
•
Duplex Left Margin : You can set the left margin for duplex printing. You can increase
or decrease the value in 0.1 millimeter increments. Set the option and click Add.
•
Short Edge Binding : You can set the binding spaces in millimeters for Short Edge
Binding. Set the option and click Add.
•
Long Edge Binding : You can set the binding spaces in millimeters for Long Edge
Binding. Set the option and click Add.
•
Simplex Top Margin : You can set the top margin for simplex printing. You can set the
value in millimeters Set the option and click Add.
•
Simplex Left Margin : You can set the left margin for simplex printing. You can
increase or decrease the value in 0.1 millimeters Set the option and click Add.
ITEM
OPTION&DESCRIPTION
General
•
Copier Enable : You can set this option to allow people to use the copier or not. If this
option is enabled, the system will allow use of the copier device. If this option is disabled,
the system will not allow use of the copier device or any copy function. Set the option
and click Add.
•
Copier Darkness : You can set the default value for copy darkness on the copier with
this option. Set the option and click Add.
•
Copier Original Type : You can set the default value for copy original type on the
copier. Set the option and click Add.