Samsung ML-3471ND-XAR - Manual (Page 46)

Devices_ 46
Fax
ITEM OPTION&DESCRIPTION
General • Fax Enabled : You can set this option to allow people to use fax or not. If this option is
enabled, the system will allow use of the fax device. If this option is disabled, the system
will not allow use of the fax device or any fax function. Set the option and click Add.
• Fax Machine ID : You can set the fax machine’s ID to be used in the ‘from’ field of the
TTI (Transmitting Terminal Identification). Set the option and click Add.
• Fax Number : You can set the fax machine’s phone number to be used in the ‘from’
field of the RTI (Receiving Terminal Identification). Set the option and click Add.
• Fax Default Darkness : You can set the default value for the darkness of a fax image.
Set the option and click Add.
• Fax Default Resolution : You can set the default value for the resolution of a fax image.
Set the option and click Add.
Sending • Fax Sending Redial Times : You can set the maximum redial tries when sending a fax.
Set the option and click Add.
• Fax Sending Redial Interval : You can set the time (in seconds) that the system will
wait before each fax redial try. Set the option and click Add.
• Fax Sending Prefix Dial : You can set the prefixed phone number to be inserted for
each outgoing fax call. Set the option and click Add.
• Fax Sending Error Correction Mode Enabled : You can set Error Correction Mode
(ECM) usage. If you enable this option, ECM will be used in fax transmissions. Set the
option and click Add.
• Fax Sending Report : You can set this option to automatically print a report after a fax
is sent. If it’s set to On, a report will always print out after a fax job. If it’s set to On
Errors, a report will print out only when an error occurs during transmission. Set the
option and click Add.
Receiving • Fax Receiving Mode : You can set the fax receiving mode. If it’s set to Tel, the fax
won’t be received and the fax ring will ring until a user answers the call with an external
phone. If it’s set to Fax, a fax will be received automatically after the number of rings you
set (See below option). If it’s set to Ans/Fax, a fax will be received automatically after
CNG tone and Remote Code or after the number of rings you set. Set the option and
click Add.
• Fax Receiving Ring to Answer : You can set the number of rings before answering
and receiving an incoming fax. Set the option and click Add.
• Fax Receiving Start Code Enabled : You can set the Remote Code usage. If you
enable this option, Remote Code will be used to start receiving a fax automatically. Set
the option and click Add.
• Fax Receiving Start Code : You can set the value for Remote Code used to start
receiving a fax automatically. Set the option and click Add.
• Fax Receiving Auto Reduction Enabled : You can set this option to automatically
reduce a received fax’s image size. If you enable this option, automatic reduction of fax
image size will be used. Set the option and click Add.
• Fax Receiving Discard Size : You can set the size of a fax received image to be
discarded. Set the option and click Add.
• Fax Receiving Default Duplex : This option is to set receiving a fax in duplex form as
default. Set the option and click Add.