Samsung EC-HZ15WABP-US - Manual (Page 46)

045
Fn button: White balance
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for
a given shooting environment by setting up the custom white balance.
1. Select the [Measure: SH] ( ) menu
of the White Balance and place a sheet
of white paper in front of the camera so
that the LCD monitor shows only white.
2. MENU/OK button: Selects previous
custom white
balance.
Shutter button: Saves new custom white balance.
– The custom white balance value will be applied, starting with the
next picture you take.
– The user confi gured white balance will be remain effective until it is
overwritten.
Fn button: Aperture Value
This mode will set the aperture value for
automatic exposure in manual mode.
Smaller aperture values make the object
sharp but blur the background. Larger
aperture values make both the object
and background sharp.
Setting up the Aperture Value
Press the Fn button. Then press the command lever to the left or right to
set the aperture value.
Fn button: Shutter Speed
This mode will set the shutter speed for
automatic exposure in manual mode.
High shutter speeds can capture a
moving object in a way that makes it
seem as if the object is not moving. Low
shutter speeds can capture a moving
object, giving it a dynamic feeling of
movement.
Setting up the Shutter Speed
Press the Fn button and then Left/Right button. Press the command
lever to the left or right to set the shutter speed.
Aperture Value
Shutter Speed
White paper
1 1
1/30 F3.3 1/30 F3.3
1 1
1/30 F3.3 1/30 F3.3