Samsung EC-HZ15WABP-US - Manual (Page 94)

093
PictBridge: Reset
Initialises user-changed confi gurations.
1. Use the Up/Down button to select the
[Reset] menu tab. And then press the
Right button.
2. Use the Up/Down button to select the
desired sub menu value, and then press
the OK button.
If [No] is selected: Settings will not be reset.
If [Yes] is selected: All print and image settings will be reset.
Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came
with your printer.
Software notes
Please ensure that you read the instruction manual carefully before
use.
– Under no circumstances should all or part of either the software or the
user manual be reproduced.
– Copyrights for software are licensed only for use with a camera.
– In the unlikely event of a manufacturing fault, we will repair or exchange
your camera. We cannot, however, be held responsible in any way for
damage caused by inappropriate use.
– Using a Hand-made PC or a PC and OS that has not been guaranteed
by the manufacturer is not covered by the Samsung warranty.
– Before reading this manual, you should have a basic knowledge of
computers and O/S (Operating Systems).
PICTBRIDGE
Layout
Type
Quality
Date Print
File Name
Reset
Back Set OK
No
Yes