Samsung EC-HZ15WABP-US - Manual (Page 88)

087
Auto power off
This function switches the camera off
after a set amount of time in order to
prevent unnecessary battery drainage.
– Sub menus
[Off]: Do not want to use the Power Off
function.
[1min], [3min]*, [5min], [10min]:
The power will turn off automatically if not used for the period of time
specifi ed.
– After replacing the battery, the [Power Off] setting will be preserved.
– Note that the automatic [Power Off] function will not operate if the
camera is in the PC/Printer mode, slide show, playing back a voice
recording and playing back a movie clip.
Settings ( )
Selecting video out type
The Movie output signal from the camera can be NTSC or PAL. Your
choice of output will be governed by the type of device (monitor or
TV, etc.) to which the camera is connected. PAL mode can support
only BDGHI.
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor and the LCD monitor of
the camera.
Selecting Video
out type
Description
NTSC
U.S.A, Canada, Japan, South Korea, Taiwan,
Mexico.
PAL
Australia, Austria, Belgium, China, Denmark,
Finland, Germany, U.K., Holland, Italy, Kuwait,
Malaysia, New Zealand, Singapore, Spain, Sweden,
Switzerland, Thailand, Norway.
Back Set OK
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
Off
1min
3min
5min
10min
Back Set OK
SETTINGS
Reset
Recycle Bin
File
Imprint
Power Off
Video Out
NTSC
PAL