Samsung SWD-M100ZKECLW - Manual (Page 112)

109
Note: If the onboard WiMAX modem is not first activated prior to initiating the
PAM feature, you will receive an error message on the External
Connection page once you attempt to initiate a Mobile WiMAX
connection (page 110).
2. Set the External Connections menu to enable Mobile WiMAX
communication via the USB:
• From the Today screen, touch Start ( ) > Settings.
• Tap the Connection tab and touch External Connection > Mobile
WiMAX.
• Touch to save the new connection type and activate the
Samsung USB mWiMAX Adapter driver.
3. Connect one end of the USB data cable (included with your
device) into the USB port on your computer.
4. Connect the other end into the Power/USB Data jack on the
left side of the device.
• If you are unable to recognize the device in PAM mode, you can
confirm the correct Network adapter is being used:
– From your computer, click Start > Control Panel > System >
Hardware tab (1).
Note: Another navigation route is to right-click on your My Computer icon and
click Properties > Hardware tab.
• Click Device Manager and open the Network adapters area (2) to
confirm the proper driver installation.
ok
SWD-M100.book Page 109 Monday, March 8, 2010 8:09 AM