Samsung SWD-M100ZKECLW - Manual (Page 36)

33
2. Press the desired key.
– or –
To only enter all top row characters, press twice.
• For example, to enter “11:30”, you would use the keyboard
sequence shown below.
• If you make a mistake and enter the wrong character, press
to erase a single character. Press and hold to erase an
entire word.
Entering Symbols
Symbols can be entered from the keyboard (using the key)
or from the Symbols page (accessed using the key).
Note: To use (Symbols page), the Text Input Mode must be set to
Samsung Keypad.
1. Position the cursor where you want the symbol to appear
within your message.
2. Press to launch the onscreen Symbols page. There
are up to eight pages of symbols (accessible by the bottom
left button. Ex: 1/8 thru 8/8).
3. Touch an onscreen entry to insert the selected symbol.
There are multiple pages of available symbols.
– or –
1. Choose to insert a QWERTY keyboard symbol by
positioning the cursor where you want the symbol to
appear within your message.
2. Press and then press the key for the symbol you
wish to insert. This method uses the symbols etched on
the corresponding QWERT key.
11:30
Pat@
SWD-M100.book Page 33 Monday, March 8, 2010 8:09 AM