Samsung SWD-M100ZKECLW - Manual (Page 96)

93
3. Touch the Alarm field and enter a unique name for this
alarm event. For more information, refer to “Entering Text
Using the QWERTY Keyboard” on page 30.
4. Select a repeating status for the alarm by touching either
On or Off.
5. Select the week day assigned to the alarm by touching the
onscreen day (Sunday - Saturday).
• If the Repeat function was activated (ON), you can select more than
one day.
6. Touch the Time field to open an onscreen time settings
page.
7. Touch a time field entry (Hour or Minutes) to activate the
selection.
8. Touch either the blue circle (below the grey slider) or the
slider itself, and drag it either left (to decrease the value) or
right (to increase the value).
• Drag and hold the slider at one end to increase the incremental
value adjustment. The further you drag the slider to one end or
another, the faster the counter changes.
• You can also touch the + or - buttons to accomplish the same
action. Touch and hold these buttons to increase the speed of the
time change.
SWD-M100.book Page 93 Monday, March 8, 2010 8:09 AM