Samsung SWD-M100ZKECLW - Manual (Page 128)

125
Beaming an Image
Beaming an image file requires the image be open and selected
within the Photo Slides page before initiating the action.
1. Press and hold . This activates the camera.
2. Touch (My Photos) to access the My Photos page
displaying the last available image.
• Scroll across the screen to flip through the available images.
• The image number is listed at the bottom of the screen.
3. Touch an image from the list to activate it then
touch .
4. Tap Bluetooth and Mondi begins to search for visible
devices within its range.
5. Touch the device name from the list to begin transmission.
The recipient will have to accept the incoming image file
before the process is complete.
Note: Please allow a few minutes for the device names to be completely
populated within the onscreen list.
6. Touch to return to the previous page.
Attaching an Image to an Outgoing Email
This process allows you to assign a selected image to a desired
Contacts entry.
1. Press and hold . This activates the camera.
2. Touch (My Photos) to access the My Photos page
displaying the last available image.
• Scroll across the screen to flip through the available images.
• The image number is listed at the bottom of the screen.
3. Touch an image from the list to activate it then
touch .
4. Tap Email and Mondi attaches the image to a new email
using the default email account (Outlook or Internet mail
[POP3]) from the list of available accounts.
• For more information, refer to “Email Setup” on page 68.
5. With the selected image already attached to a new email
message, use the QWERTY keyboard to complete the To:,
Subject and body text information. For more information,
refer to “Entering Text Using the QWERTY Keyboard” on
page 30. ok
SWD-M100.book Page 125 Monday, March 8, 2010 8:09 AM