Samsung SC-MX10A-XAP - Manual (Page 100)

88_English
Symptom Explanation/Solution
When the screen is exposed to
direct sunlight during recording,
the screen becomes red or black
for an instant.
This is not a malfunction. •
During recording, the date/time
does not display.
"Date/Time" is set to "Off". Set the "Date/Time" to "On". ➥ page 64 •
There is a time difference
between the point where you
press Recording start/stop
button and the point where the
recorded movie starts/stops.
On your camcorder, there may be a slight time delay between the point
when you press Recording start/stop button and the actual point where
the recorded movie starts/stops. This is not an error.
•
The recording stops.
The internal temperature of your camcorder is unusually high. Turn off your
camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off your
camcorder and leave it for about 1 hour in a cool place.
➥ page 79
•
•
troubleshooting