Connection, Viewing on tv screen, Connecting to a tv – Samsung SC-MX10A-XAP User Manual

Page 89: English _77, Page 80

Advertising
background image

English

_77

connection

You can view the recorded movies on a large screen by connecting the memory camcorder to a TV.

VIEWING ON TV SCREEN

Connecting to a TV

Use the provided multi-AV cable to connect the memory

camcorder to a TV as follows:

1. Connect the end of the Multi AV cable with the single plug

to the AV jack of the camcorder.

2. Connect the other end with S-Video or Video (yellow) and

left(white)/ right(red) audio cables to the TV.

Viewing on TV Screen

1. Turn on the TV and set the input selector to the Input

connection the memory camcorder is connected to.

This is often referred to as "line".

- Refer to the TV instruction manual for how to switch the

TV input.

2. Turn the memory camcorder on.

- Slide the

POWER switch downward and press the MODE button to set Player (

). ➥ page 21

- The image from the memory camcorder will appear on the TV screen.

- You can also monitor the image on the LCD screen of the memory camcorder.

3. Perform playback. You can perform playback, recording or make settings in the menu while viewing on your TV screen.

Before connecting, make sure that the volume on TV

is turned down: forgetting this may cause feedback from

the TV speakers.

Carefully connect the input and output cables to the

corresponding connections on the device the memory

camcorder is being used with.

When a copy-protected movie is played back, no image will appear on TV screen.

Information that the memory camcorder is recording will appear on the TV screen: You can also display only

part of information or switch off the display. Refer to “ TURNING THE SCREEN INDICATORS ON/OFF (

) ”

on page 25, and press the

button to switch the display status.


S-VIDE O

VIDEO

AUDIO

L

R

VIDEO

AUDIO

L

R

VIDEO

AUDIO

Red

White

Red

Yellow

White

White

Yellow

B

G

W

W

W

W

R

R

R

R

Y

Y

Y

Y

Stereo TV with

S-VIDEO Jack

Stereo TV

Mono TV

S-VIDEO

VIDEO

L-AUDIO-R

INPUT

Memory Camcorder

Normal TV

Multi-AV cable

Signal fl ow

If your TV has an S-VIDEO input jack,

use the S-Video plug for a clearer picture.

To playback your recordings, the television must be NTSC compatible.

page 80

Advertising
This manual is related to the following products: