Samsung SC-MX10A-XAP - Manual (Page 43)

English _31
Setting Date and Time
Set the current date and time so that the date and time at which you make a
recording can be recorded correctly.
The following procedure can also be used to correct the date and time
you have already set.
1. Set the "Settings" mode.
The settings menu screen appears.
Refer to "How to set the settings mode" for accessing to " Settings " mode.
➥ page 30.
2. Press the Control button ( / ) to select "Date/Time Set" and then
press the OK button.
3. Set the desired value by moving the Control button ( / ).
4. Move to the next item by moving the Control button ( / ), and then
set values by moving the Control button ( / ).
Items are displayed in the order of the date format.
By default, the Date/Time setting appears in the order of year, month, date,
hour, minute and AM/PM.
5. After setting the last item, press the OK button to fi nish the setting.
Press the MENU button to exit the menu.
•
•
•
•
•
You can set the year up to 2037.
After setting, the date and time are automatically recorded on a
special data area of the storage media.
The button type battery maintains the clock function and preset contents of
the memory : even if the battery pack or AC power adapter is removed.
The button type battery for the memory camcorder lasts about 6 months
under normal operation from the time of installation.
When the button type battery becomes weak or dead, the date/time indicator will
display "2007/01/01 12:00AM " when you turn the date and time display on. ➥page 20.
•
•
•
Turning the date and time display on/off
To switch the date and time display on or off, access the menu and change the date/time
mode. ➥page 64
•
Date/Time Set
Move OK Set
120
MIN
2007 01 01
12 : 00 AM
Settings
MENU Exit
OK
Settings
Move OK Select MENU Exit
120
MIN
Video