Samsung SC-MX10A-XAP - Manual (Page 72)

60_English
playback options
COPYING MOVIE IMAGES (SC-MX10A/MX10AU ONLY)
• Movie images are copied to the destination storage while leaving original movie images in the source storage.
• It copies from the currently-used memory to another. For example, if the built-in memory was used, it copies to a memory card.
1. Slide the POWER switch downward to turn on the memory camcorder.
Set the appropriate storage media. (SC-MX10A/MX10AU only)
(If you want to record on a memory card, insert the memory card.)
2. Press the MODE button. ➥page 21
Switches to Movie Play mode.
Select the desired movie thumbnail images, using the Control button.
3. Press the MENU button.
Menu screen appears.
4. Press the Control button ( / ) to select "Copy".
5. Select an option by pressing the Control button ( / ) and then press
the OK button.
item contents
"OK" Copies the selected movie images.
"Multi Select"
Copies the individual selected movie images.
- To copy individual movie images, select desired movie
images by pressing the OK button.
- The ( ) indicator is displayed on the selected movie
thumbnail images. Press the MENU button to confi rm.
- Pressing the OK button toggles between the movie image
being selected for copying (( ) indicator appears on
image) or not ( ) indicator is removed from image).
"All " Copies all the movies.
6. The pop-up selection menu will appear depending on the selected menu item.
In this case, select the desired item with the Control buttons ( / ) and the
OK button.
•
•
•
•
While the menu or thumbnail image screen is displayed, pressing the
Recording start/stop button will move to Movie Record mode.
It operates identically in the full image display (single image displayed on the screen).
If a memory card is not inserted, you can not perform the "Copy" function.
•
•
•
OK
Multi Select
All
Copy
Move OK Select MENU Exit
120
MIN
100-0003
OK
Multi Select
All
Copy
Move OK Select MENU Exit
120
MIN
100-0003
120
MIN
Move OK
100-0003
Play