Samsung SC-MX10A-XAP - Manual (Page 24)

12_English
CONNECTING A POWER SOURCE
There are two types of power source that can be connected to your memory camcorder.
Do not use provided power supply units with other equipment.
- The battery pack: used for outdoor recording.
- The AC power adapter : used for indoor recording.
➥ page 19
To Charge the Battery Pack
Be sure to charge the battery pack before you start using your memory
camcorder.
Battery Pack installation / ejection
It is recommended you purchase one or more additional battery packs to allow
continuous use of your memory camcorder.
Inserting the battery pack
1. Slide and open the battery slot cover as shown in the fi gure.
2. Insert the battery pack into the battery slot until it softly clicks.
Make sure that the SAMSUNG logo is facing up and the camcorder
is placed as shown in the fi gure.
3. Slide and close the battery slot cover
Ejecting the battery pack
1. Slide and open the battery slot cover and push the battery lock.
Gently push the battery lock in the direction as shown in the fi gure to eject
the battery out.
2. Pull the ejected battery out in the direction as shown in the fi gure.
3. Slide and close the battery slot cover.
•
•
•
•
•
preparation
Insert
Eject