Samsung SC-MX10A-XAP - Manual (Page 81)

English _69
USB interface
This chapter explains how to connect the camcorder to a PC using the USB cable for various functions.
- When connecting a USB cable to a PC, refer to the software installation instructions and PC specifications below.
SYSTEM REQUIREMENTS
Transferring a Digital Image through a USB Connection
The memory camcorder supports USB 2.0 High speed. (Depends on the PC specification)
You can transfer a recorded file in storage media to a PC via a USB connection.
If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the
memory camcorder.
USB Connection Speed (depending on the System)
High speed USB connection is supported by Microsoft (Windows) device drivers only.
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
Windows XP - High speed USB on a system with Service Pack 1 or later installed.
Windows Vista - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
Windows operating systems
CPU: Intel® Pentium 4 ™ , 2GHz or higher, or the equivalent
Operating systems: Windows® 2000/XP/Vista
Standard installation is required. If you have upgraded your current operating system, we can not guarantee
the proper operation of the product.
Memory: 512MB RAM or higher
Hard Disk: 2GB or higher
Resolution: 1024x768 dots, 24bit color
USB port: USB2.0 High Speed
- System requirements mentioned above are recommendations. Even on a system that satisfies the requirements
operation is not ensured depending on the system.
- This memory camcorder is recognized just as a removable storage device on the Macintosh computer.
(Mac OS 10.3 or above that support High Speed USB standards)
•
•
•
•
•
•
•
•
•
•
•
•
•