AVE Video Serial Synchronous ATM Interface VSSI-PRO - Manual (Page 17)

17
TCPIP 232 Adapter Connections
1. Remove the ATM LAN Cable which is connected direct to the ATM and then immediately plug it in to the TCPIP 232
Adapter. Loop the LAN cable which came with TCPIP 232 Adapter via the RJ-45 Port on the TCPIP 232 Adapter rear
panel to the ATM. Delay in doing this might cause the ATM to go off-line. If this happens then wait for the ATM to
automatically come back on-line.
2. Connect the VSSI-Pro to the TCPIP 232 Adapter using the TCPIP 232-to-VSSI-Pro cable.
3. Connect the camera and video output cable to the monitor or DVR.
4. Power up your system to program VSSI-Pro.
Figure 16: TCPIP 232 Adapter Connections
PROGRAMMING THE VSSI-PRO
VSSI-Pro VIDEO SERIAL ATM INTERFACE
Figure 17: VSSI-Pro Connections with TCPIP 232 Adapter
VSSI-PRO
RG-59U
CAMERA
DC CABLE
WAVE TRANSFORMER
ATM
TCPIP 232
ADAPTER
RG-59U
MONITOR