AVE Video Serial Synchronous ATM Interface VSSI-PRO - Manual (Page 22)

22
VSSI-Pro VIDEO SERIAL ATM INTERFACE
NOTE
" " " " "
Remember, enabling the titler will limit text insertions to 10 lines maximum, and
with the clock on then 9 maximum.
EXIT
Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.
PROGRAMMING THE VSSI-PRO
When the desired time/date is displayed, press the “Up” and “Down” buttons simultaneously to enter the title into
memory and return to the menu.
The white boxes will disappear and your title will be displayed as it will appear on-screen.
SCREEN BLANK
Choices: NONE, 6, 12, 20, 30, 60, 120, 180, 300 (in seconds)
This is the amount of time that the VSSI-Pro text display will remain on-screen after a transaction before blanking itself
off (not the video picture, just the ATM transaction data) until the next transaction.
Press the “Up” or “Down” button to move the cursor to “SCREEN BLANK” and press “Set”. The cursor will begin flashing.
Press the “Up” or “Down” button to move the cursor to cycle through the selections. Press the “Up” or “Down” button to
cycle through the values and press “Set” when the desired value is displayed.
NOTE
" " " " "
Choosing “NONE” means no blanking. The VSSI-Pro will display the last transaction
until a new transaction is performed and over-writes the previous transaction.
Figure 26: TEXT DISPLAY Sub-Menu
SCREEN BLANK 20
DISPLAY LINES 10
DISPLAY FORMAT TOP
LINE COMPRESS ON
LEFT JUSTIFIED ON
SCROLL DELAY ON
DISPLAY ON
EXIT
TEXT DISPLAY
This menu will give you more control over the actual text block formatting and its appearance on-screen. On the main-
menu, press the “Up” or “Down” button to move the cursor to “TEXT DISPLAY” and press “Set”. The following sub-menu
will appear: