AVE Video Serial Synchronous ATM Interface VSSI-PRO User Manual
Page 20
20
T/D DISPLAY
ON
TIME DISPLAY
12 HOUR
DATE FORMAT
DD/MM/YY
DAYLIGHT SAVING
DISABLE
SET TIME/DATE
RESET TIME/DATE
T/D LOCKING
ON
EXIT
Figure 24: CLOCK Sub-Menu
PROGRAMMING THE VSSI-PRO
VSSI-Pro VIDEO SERIAL ATM INTERFACE
CLOCK
To program the clock's functions, use the “Up” and “Down” buttons to move the cursor to “CLOCK” and press “Set”. The
following sub-menu will appear:
T/D DISPLAY turns the time/date display on or off. Press the “Up” or “Down” button to move the cursor to “T/D
DISPLAY” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between “ON” or
“OFF” and press “Set” when the desired value is displayed.
TIME DISPLAY selects either 12-hour AM/PM or 24-hour Military Time format with AM/PM. Press the “Up” or “Down”
button to move the cursor to “TIME DISPLAY” and press “Set”. The cursor will start flashing. Press the “Up” or
“Down” button to toggle between time formats and press “Set” when the desired format is displayed.
DATE FORMAT chooses one of the three available formats. Press the “Up” or “Down” button to move the cursor to
“DATE FORMAT” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between
date formats and press “Set” when the desired format is displayed.
DAYLIGHT SAVING selects, for example, USA, Canada, Australia or is disabled. Press the “Up” or “Down” button to
move the cursor to “DAYLIGHT SAVING” and press “Set”. The cursor will start flashing. Press the “Up” or “Down”
button to toggle between values and press “Set” when the desired value is displayed.
SET TIME/DATE sets the clock manually. Press the “Up” or “Down” button to move the cursor to “SET TIME/DATE”
and press “Set”. The time/date will appear and the cursor will start flashing. Press the “Up” and “Down” button to
change the value and press “Set” when the desired value is displayed. The value is selected and the cursor will
advance to the next position. When the desired time/date is displayed, press the “Up” and “Down” buttons simulta-
neously to enter the time/date into memory and return to the previous menu.
RESET TIME/DATE resets the clock to the default value. Press the “Up” or “Down” button to move the cursor to
“RESET TIME/DATE” and press “Set” to reset the time/date.
T/D LOCKING turns the time/date locking on or off. If the time/date locking is turned on, make sure that the time and
date format selected is the same as the ATM time and date format. Press the “Up” or “Down” button to move the
cursor to “T/D LOCKING” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle
between “ON” or “OFF” and press “Set” when the desired value is displayed.
NOTE
"
"
"
"
"
Enabling the clock limits the number of display lines to 10 maximum.