AVE Video Serial Synchronous ATM Interface VSSI-PRO - Manual (Page 43)

43
Figure 53: DATA CAPTURE Sub-Menu
Figure 54: CAPTURE TO PORT 1 Display
PROGRAMMING THE VSSI-PRO
VSSI-Pro VIDEO SERIAL ATM INTERFACE
Press “Set” to return to the previous menu.
EXIT
Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.
PORT B TEST
The sub-menu items for Port B are the same as for Port A. The only difference is that Port A is the data from the modem
to the ATM and Port B is the data from the ATM to the modem. Note that the RX/TX TEST for Port B is not functional at
this time.
DATA CAPTURE
Press the “Up” or “Down” button to move the cursor to “DATA CAPTURE” and press “Set”. The following sub-menu will
appear:
Figure 52: TRANSMIT [ TX ] TEST Display
TRANSMIT [ TX ] TEST
Press the “Up” or “Down” button to move the cursor to “TRANSMIT [ TX ] TEST” and press “Set”. The following display
will appear (example only):
PROTOCOL : ASYNC
RX BAUDRATE : 19200
TX BAUDRATE : 19200
DATA ENCODE : NRZ
ASCII
CAPTURE TO PORT 1
CAPTURE TO MEMORY
DUMP MEMORY
DUMP TCP / IP
EXIT
CAPTURE TO PORT 1
Press the “Up” or “Down” button to move the cursor to “CAPTURE TO PORT 1” and press “Set”. The following display will
appear (example only):
PROTOCOL : ASYNC
RX BAUDRATE : 19200
TX BAUDRATE : 19200
DATA ENCODE : NRZ
ASCII
DUMPING DATA...
Press “Set” to return to the previous menu.