Advantech PCM-9588 - Manual (Page 25)

15 PCM-9588 User Manual
Chapter 2
H
/W Installation
2.2.2.20 -V5 and -V12 connector (CN27)
CN27 is a wafer type 3-pin connector for -V5 and -V12.
2.2.2.21 DDR2 SODIMM Socket (CN29)
A SO-DIMM, or small outline dual in-line memory module, is a type of computer
memory built using integrated circuits.PCM-9588 has 1 x 200 pin SO-DIMM and can
support memory size up to 2GB.
2.2.2.22 DVI interface connector (CN30)
PCM-9588 can support one DVI by optional. The Digital Visual Interface (DVI) is a
video interface standard designed to maximize the visual quality of digital display
devices such as flat panel LCD computer displays and digital projectors. It is
designed for carrying uncompressed digital video data to a display. It is partially com-
patible with the High-Definition Multimedia Interface (HDMI) standard in digital mode
(DVI-D).
2.2.2.23 SATA Connector (CN31 and CN32)
PCM-9588 supports Serial ATA via CN31 and CN32. Data transfer rates up to 150
MB/s, enabling very fast data and file transfer, and independent DMA operation on
two ports.
The Serial Advanced Technology Attachment computer bus has the primary function
of transferring data between the motherboard and mass storage devices (such as
hard disk drives and optical drives) inside a computer.
2.2.2.24 LAN LED connector (CN34)
CN34 is a connector for LAN indication LED.
LED1: Off for 10M LAN, Green for 100M LAN.
LED2: On for Link, flash for active.
2.2.2.25 GPIO connector (CN36 and CN37)
GPIO is General Purpose Input Output. PCM-9588 supports 16-bit programmable I/O
via CN36 and CN37. These GPIO pin can be programmed as data input pin or output
control signal pin to control device.