Advantech PCM-9588 - Manual (Page 40)

PCM-9588 User Manual 30
This item allows user to enable and key in Date/time to power on system
3.2.7 PnP/PCI Configurations
! Init Display First [PCI Slot]
This item is setting for start up Video output from PCI or Onboard device.
! Reset Configuration Data [Disabled]
This item allow user to clear any PnP configuration data stored in the BIOS.
! Resources Controlled By [Auto (ESCD)]
– IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-3, 4, 5,
7, 9, 10, 11, 12, 14, and 15.
– DMA Resources
This item allows you respectively assign an interruptive type for DMA, 0, 1, 2,
3, 4, 5, 6, and 7.
! PCI VGA Palette Snoop [Disabled]
The item is designed to solve problems caused by some non-standard VGA
cards. A built-in VGA system does not need this function.
Disabled Disable this function.
Enabled Enable alarm function to power on system
Data (of month) Alarm 1-31
Time (HH:MM:SS) Alarm (0-23) : (0-59) : 0-59)
Note! This "PnP/PCI Configurations" option sets up the IRQ and DMA (both
PnP and PCI bus assignments).