Blodgett XR8-E - Manual (Page 16)

14
Operation
Standard Control
CONTROL DESCRIPTION
1. POWER SWITCH - controls power to the oven
2. DISPLAY - displays time, temperature and program-
ming information
3. HEAT LED - lights when the burners are on
4. READY LED - lights when oven has reached the pre-
set temperature
5. ACTUAL TEMP LED - lights when temp key is
pressed, actual temp is displayed
6. SELECTION DIAL - use to enter time, temperature
and programmable settings. Turn clockwise to in-
crease or counter-clockwise to decrease values in
display.
7. TEMP KEY - press to program the bake temperature
or display the actual oven temperature
8. TIME KEY - press to program the bake time or display
the time during a bake cycle
9. STEAM KEY - press to program steam time to inject
a burst of steam
10. FAN DELAY KEY - press to program a time delay for
fan and heat during and after steaming
11. VENT KEY - press to manually open and close the
oven vent
12. START/STOP KEY - press to start, stop or pause the
bake
13. GAS SHUTOFF SWITCH - controls gasy flow to the
oven
OVEN
OFF
OVEN
ON
HEAT READY ACTUAL
TEMP
XR8
HIGH
LOW
FAN
Solid State Digital
START
STOP
Figure 7